Meganet - Supermicro Shadow
Module: X9DAX-7TF of Xeon is a part of Motherboards
X9DAX-7TF
Key Features :
  • trong class="textA" style="color:#090; font-size:12px;"> ? Support Hyper-Speed
  • Dual socket R (LGA 2011) supports Intel® Xeon® processor E5-2600
  • Intel® C602 chipset; QPI up to 8.0GT/s
  • Up to 512GB DDR3 1600MHz ECC Registered DIMM; 16x DIMM sockets
  • 2 PCI-E 3.0 x16, 3 PCI-E 3.0 x8, 1 UIO PCI-E 3.0 x8 (for SMC UIO HBA) or 1 PCI-E 2.0 x4 (in x8)
  • Intel® X540 Dual port 10GBase-T
  • 8x SATA2 and 2x SATA3 ports
  • 8x SAS2 ports from LSI 2208
  • Integrated IPMI 2.0 and KVM with Dedicated LAN
  • Dual port front and rear USB 3.0
  • . Performance boost with Hyper-Speed
Specification
Product SKUs
MBD-X9DAX-7TF-O
  • X9DAX-7TF (Standard Retail Pack)
MBD-X9DAX-7TF -B
  • X9DAX-7TF (Bulk Pack)
Physical Stats
Form Factor
  • Enhanced Extended ATX
Dimensions
  • 13.68" x 13" (34.74cm x 33cm)
Processor/Cache
CPU
  • Intel® Xeon® processor E5-2600 (up to 150W TDP **)
  • Dual Socket R (LGA 2011)
Cache
  • Up to 20MB
System Bus
  • QPI up to 8 GT/s
** Motherboard supports this maximum TDP. Please verify your system can thermally support
System Memory
Memory Capacity
  • 16x 240-pin DDR3 DIMM sockets
  • Supports up to 512 GB DDR3 ECC Registered memory (RDIMM)
  • Supports up to 128 GB DDR3 ECC/non-ECC Un-Buffered memory (UDIMM)
Memory Type
  • 1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
  • Support ECC and non-ECC UDIMMs
DIMM Sizes
  • 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
Memory Voltage
  • 1.5 V, 1.35 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
On-Board Devices
Chipset
  • Intel® C602 chipset
SATA
  • SATA 2.0 3Gbps with RAID 0, 1, 5, 10
  • SATA 3.0 6Gbps with RAID 0, 1
SAS
  • SAS2 from LSI 2208 (1GB cache)
  • HW RAID 0, 1, 5, 6, 10, 50, 60 support
  • Supports up to 16 drives
(Both CPUs need to be installed for SAS controller to be enabled)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Nuvoton WPCM450 BMC
Network Controllers
  • Intel® X540 Dual Port 10GBase-T
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10GBase-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Audio
  • RealTek ALC889 7.1 High Definition Audio with S/PDIF header
Input / Output
SATA
  • 2 SATA 3.0 ports (6Gbps)
  • 8 SATA 2.0 ports (3Gbps)
SAS
  • 8 SAS2 ports (6Gbps)
LAN
  • 2 RJ45 10GbE LAN ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 4 USB 3.0 ports (2 rear + 2 via header)
  • 7 USB 2.0 ports total
    (4 rear + 2 via header + 1 Type A)
Audio
  • Line-in / Line-out / Microphone Ports
Serial Port / Header
  • 1 Fast UART 16550 Header
IEEE 1394a
  • 2 Headers
DOM
  • 1 DOM (Disk on Module) power connector
TPM
  • 1 TPM 1.2 20-pin Header
Chassis ( Optimized for X9DAX-7TF )
2U Chassis
  • CSE-829BTQ-R1K28LPB
Tower / 4U Rackmount
  • CSE-747TG-R1400B-SQ
Important Chassis Notes
  • To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.
Expansion Slots
PCI-Express
  • 2x PCI-E 3.0 x16
  • 3x PCI-E 3.0 x8
  • 1x UIO PCI-E 3.0 x8 (for SMC UIO HBA) or 1x PCI-E 2.0 x4 (in x8)

    (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram for details.)
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.3
  • ACPI 1.0 / 2.0 / 3.0 / 4.0
  • USB Keyboard support
  • SMBIOS 2.7.1
  • UEFI
Management
Software
  • SuperDoctor® III
  • Watch Dog
  • NMI
  • IPMI 1.5 / 2.0
Power Configurations
  • ACPI / APM Power Management
  • Power-on mode for AC power recovery
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
  • 6+1 Phase-switching voltage regulator
FAN
  • 8x 4-pin fan headers (up to 8 fans)
  • 8x fans with tachometer monitoring
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 8x Fan Connectors
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • CPU / System Overheat LED
  • Suspend static indicator LED
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
  • RoHS, Halogen Free
Operating Environment
Operating Temperature Range
  • 10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range
  • -40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range
  • 8% - 90% (non-condensing)
Non-Operating Relative Humidity Range
  • 5% - 95% (non-condensing)
Parts List (retail)
Part Number
Qty
Description
X9DAX-7TF
MBD-X9DAX-7TF
1
X9DAX-7TF Motherboard
I/O Cables
CBL-0044L
4
SATA CABLE 61CM FLAT S-S PBF
CBL-0097L-03
2
30AWG 50CM Ipass to 4 SATA, W/50cm SB, S
CBL-0173L
INTERNAL TO EXTERNAL FOR 1394 CONNECTOR,PBF
Heat Sink (optional, not included)
-
CPU Heat Sink reference
TPM security module (optional, not included)
AOC-TPM-V20-IFN
IFX TPM Krypton Lite Board Module Rev.1U, SLB9635TT1.2FW3.19 (for 20pin TPM header). About TPM
Meganet - Supermicro bg Shadow
Meganet - Supermicro Click to Call