Meganet - Supermicro Shadow
Module: C2SEA of Core™ is a part of Motherboards
C2SEA
Key Features :
  • Intel® Core™ 2 Extreme, Quad and Duo processors in LGA775 Package (FSB 1333/1066/800)
  • Intel® G45 + ICH10 Chipset
  • Up to 8GB dual channel unbuffered, non-ECC DDR3 1333/1066/800 SDRAM
  • Realtek RTL8111C Gigabit Ethernet Controller
  • Built-in SATA2 Controller 6x SATA (3Gbps)
  • 1 (x16) PCI-Express 2.0, 1 (x4) PCI-Express (using x16 slot), 1 (x1) PCI-Express, 2x 32-bit PCI slots
  • High Definition Multimedia Interface (HDMI)
  • Realtek ALC888 HD 7.1 Channel Audio
  • Total 12 USB 2.0 ports 6 rear + 2 on-board + 4 headers
  • . 2 IEEE 1394a headers
Specification
Product SKUs
MBD-C2SEA -O
  • C2SEA (Standard Retail Pack)
MBD-C2SEA -B
  • C2SEA (Bulk Pack)
Physical Stats
Form Factor
  • ATX
Dimensions
  • 12.0" x 9.6 ", (30.5cm x 24.4cm)
Processor/Cache
CPU
  • Single LGA775 Socket
  • Supports Intel® Core™2 Extreme QX9000/QX6000 series
  • Supports Intel® Core™2 Quad Q9000/Q8000/Q6000 series
  • Supports Intel® Core™2 Duo E8000/E7000/E6000/E4000 series
  • Supports Intel® Pentium® E5000/E2000 series
  • Supports Intel® Celeron® E1000 and 400 series
System Bus
  • 1333 / 1066 / 800 MHz system bus
System Memory
  • Four 240-pin DIMM sockets
  • Supports up to 8 GB of unbuffered, non-ECC DDR3 1333/1066/800MHz memory (Dual Channel)
Memory Type
  • DDR3 1333/1066/800MHz unbuffered, non-ECC SDRAM, 240-pin gold-plated DIMMs
DIMM Sizes
  • 256 MB, 512 MB, 1 GB, 2 GB
Memory Voltage
  • 1.5 V only
On-Board Devices
Chipset
  • Intel G45 Express Chipset
  • ICH10
Serial ATA
  • Intel® ICH10 SATA2 (3 Gbps) controller built-in
Network Controllers
  • 1 x Realtek RTL8111C Gigabit Ethernet
  • Supports 10 BASE-T, 100 BASE-TX, and 1000 BASE-T with RJ45 output
  • Intel GMA X4500 HD
Super I/O
  • Winbond 83627DHG-P chip
Clock Generator
  • CV183-2
Input / Output
Serial ATA
  • Six Serial ATA ports (3Gbps)
  • Six SATA hard drives supported
IDE
  • One EIDE channel supports up to two UDMA IDE devices
  • ITE8213F chipset
Floppy
  • 1 Floppy controller; 1.44 MB
LAN
  • 1x RJ45 LAN port
USB
  • 12x USB 2.0 / 1.1 compatible
  • 6 rear + 2 on-board + 4 headers
  • S/PDIF out
  • Line-in / Line-out / Microphone Ports
VGA
  • On board VGA + HDMI port
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Ports
  • 1x Serial Header
IEEE 1394a
  • 2x headers
OS Compatibility
Please see our OS Compatibility Chart
Chassis ( Optimized for C2SEA )
Mid-Tower
  • CSE-733E-465B
  • CSE-733i-465B
  • CSE-733i-645
  • CSE-733T-465B
  • CSE-733T-645
  • CSE-733TQ-465B
  • CSE-733TQ-645
Tower / 4U Rackmount
  • CSE-742T-650
  • CSE-742TQ-650
  • CSE-743i-465B
Important Note
  • To ensure system stability, a 420W (minimum) ATX power supply [8-pin +12V AND (20 or 24-pin)] is required.
Expansion Slots
PCI-Express
  • 1 (x16) PCI-E 2.0 slot
  • 1 (x4) PCI-E (using x16 slot)
  • 1 (x1) PCI-E slot
PCI
  • 2x 32-bit 33MHz PCI (5V) slots
System BIOS
BIOS Type
  • 16Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • DMI 2.3
  • PCI 2.3
  • ACPI 1.0 / 2.0
  • USB Keyboard support
  • SMBIOS 2.3
Management
Software
  • SuperDoctor® III
  • Watch Dog
  • NMI
  • Hardware monitor in W83627DHF (PECI support)
Power Configurations
  • ACPI Power Management
  • Main Switch Override Mechanism
  • Wake-On-Ring (WOR) header
  • Wake-On-LAN (WOL) header
  • Keyboard Wakeup from Soft-Off
  • Power-on mode control for AC power recovery
  • Internal / External modem remote ring-on
  • Suspend to RAM (STR)
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V/+5V Standby, VBAT
  • CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
  • Adjustable CPU clock frequency ratio (Only available if CPU is supported)
FAN
  • Total of five 4-pin fan headers
  • 3 x fans with tachometer monitoring
  • Status monitor for speed control
  • Status monitor for on / off control
  • Support 3-pin PWM fans (without speed control)
  • Low noise fan speed control
  • Pulse Width Modulated (PWM) fan conn.
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Monitor 2 (TM2) Support
  • PECI
LED
  • CPU / System Overheat LED
  • Standby power alert LED
Other Features
  • Chassis intrusion Detection
  • Chassis intrusion Header
Operating Environment / Compliance
RoHS
RoHS 6/6
Environmental Spec.
  • Operating Temperature: 10°to 35°C (50°to 95°F)
  • Non-operating Temperature: -40°to 70°C (-40°to 158°F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5 to 95% (non-condensing)
Standard Retail Package
Part Number
Qty
Description
C2SEA
MBD-C2SEA -O
1
C2SEA Motherboard
Manual(s)
MNL-1043
Motherboard Manual for C2SEA
I/O Cables
CBL-0022L CBL-0036L-03 CBL-0044L
1 1 2
ATX Floppy Cable ATA 66/100 IDE LP Cable SATA Cable (2Ft.)
Driver Disk
CDR-C2
Version 1.04 (or newer) CD
I/O Shield
MCP-260-00021-0N
I/O Shield for C2SEA
Meganet - Supermicro bg Shadow
Meganet - Supermicro Click to Call