Meganet - Supermicro Shadow
Module: H8SGL of Opteron6000 is a part of Motherboards
H8SGL
Key Features :
  • Single AMD Opteron? 6000 series processors (G34) 16/12/8-Core ready; HT3.0 Link support
  • AMD SR5650 / SP5100 Chipset
  • Up to 128GB DDR3 Registered ECC or 32GB DDR3 Unb. ECC/non-ECC 1600/1333/1066 SDRAM in 8 DIMMs
  • Two Intel® 82574L controllers, Dual-Port Gigabit Ethernet
  • 6x SATA2 3.0 Gbps Ports via AMD SP5100 controller, RAID 0, 1, 10
  • 1/1/1/3 PCI-E 2.0 x8 (in x16) / x8 / x4 (in x8) / PCI
  • Integrated Matrox G200 Graphics
Specification
Product SKUs
MBD-H8SGL
  • H8SGL (Standard Retail Pack)
Physical Stats
Form Factor
  • ATX Form
Dimensions
  • 12" x 8" (30.5cm x 20.3cm)
Processor/Chipset
CPU
  • Single 1944-pin Socket G34
  • Supports one 16/12/8-Core ready AMD Opteron 6000 Series processors
  • HT3.0 Link support
  • AMD chipset SR5650/SP5100
System Memory
Memory Capacity
  • Eight DIMM sockets
  • Support up to 128GB DDR3 1600/1333/1066 MHz memory
  • Quad channel memory bus
  • See Detailed Memory Support Matrix
Memory Type
  • DDR3 1600/1333/1066 MHz Registered ECC SDRAM or Unbuffered ECC/non-ECC 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB, 8GB, 16GB
Memory Voltage
  • 1.35V or 1.5V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
On-Board Devices
SATA
  • AMD SP5100 (RAID 0, 1, 10)
Network Controllers
  • Two Intel® 82574L controller, Dual-Port Gigabit Ethernet
  • 10/100/1000BASE-T support
VGA
  • Matrox G200 16MB DDR2
Super I/O
  • Winbond® W83527 chip
Input / Output
SATA
  • 6x SATA2.0 (3Gb/s) Ports
USB
  • 8x USB 2.0 ports
  • 2x Rear, 2x header(4x ports), and 2x TypeA
VGA
  • 1x VGA port
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Ports
  • 1x Fast UART 16550 serial port
  • 1x serial port header
Expansion Slots
PCI-E/PCI
  • 1/1/1/3 PCI-E 2.0 x8 (in x16) / x8 / x4 (in x8) / PCI
Chassis ( Optimized for H8SGL )
1U Chassis
  • CSE-512F-350B
  • CSE-811T-260
  • CSE-811T-300
  • CSE-813MTQ-350C
Mid-Tower
  • CSE-733E-500B
  • CSE-733i-500B
  • CSE-733T-500B
  • CSE-733TQ-500B

  • (with active heatsink)
System BIOS
BIOS Type
  • 16Mb SPI Flash ROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • DMI 2.3
  • PCI 2.2
  • ACPI 2.0
  • USB Keyboard Support
  • SMBIOS 2.3
Management
Software
  • Super Doctor III
Power Configurations
  • ACPI Power Management
  • Wake-On-LAN (WOL) header
  • Keyboard Wakeup from Soft-Off
  • Power-on mode control for AC power loss recovery
PC Health Monitoring
CPU
  • Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, VBAT, HT, memory, chipset
  • CPU switching voltage regulator
FAN
  • Up to 6-fan status tachometer monitoring
  • Up to six 4-pin fan headers
  • Status monitor for speed control
  • 3-pin fan support (w/o speed control)
  • Low noise fan speed control
     (4-pin fan only)
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU Thermal Trip Support
  • Thermal control for 8x Fan connectors
  • I2C Temperature Sensing Logic
LED
  • CPU / System Overheat LED
  • +5V Standby Alert LED
Other Features
  • Chassis Intrusion Detection
  • Chassis Intrusion Header
Operating Environment / Compliance
RoHS
RoHS 6/6
Environmental Specifications
  • Operating Temperature:
       10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:
       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
       5% to 95% (non-condensing)
OS Compatibility
OS Compatibility Chart
Regulatory
FCC
  • Passed to meet FCC standard requirement
Retail Pack List
Part Number
Qty
Description
H8SGL
Retention
I/O Cable 1
I/O Cable 2
I/O Cable 3
Driver Disk
I/O Shield
Meganet - Supermicro bg Shadow
Meganet - Supermicro Click to Call