Meganet - Supermicro Shadow
Module: H8DGU-F of Opteron6000 is a part of Motherboards
H8DGU-F
Key Features :
  • Dual AMD Opteron? 6000 series processors (G34) 16/12/8-Core ready; HT3.0 Link support
  • AMD SR5670 + SP5100 Chipset
  • Up to 256GB DDR3 Registered ECC 1600/1333/1066 SDRAM in 16 DIMMs
  • Intel® 82576 controllers, Dual-Port Gigabit Ethernet
  • 6x SATA2 3.0 Gbps Ports via AMD SP5100 controller, RAID 0, 1, 10
  • PCI-Express (Gen 2.0): 1U Left Side: 1/1 UIO/Ex8 or 2 Ex8; or 1 Ex16 or 1/1 UIO/Ex16 2U Left Side: 1/2 UIO/Ex8 or 1/1 UIO/Ex16; or 3 Ex8 (See Optional Part List)
  • Integrated Matrox G200 Graphics
  • Integrated IPMI 2.0 + KVM with dedicated LAN
Specification
Product SKUs
MBD-H8DGU-F
  • H8DGU-F (Standard Retail Pack)
Physical Stats
Form Factor
  • Proprietary
Dimensions
  • 12.1" x 13" (30.7cm x 33.2cm)
Processor/Chipset
CPU
  • Dual 1944-pin Socket G34
  • Supports up to two 16/12/8-Core ready AMD Opteron 6000 Series processors
  • HT3.0 Link support
  • AMD chipset SR5670 + SP5100
System Memory
Memory Capacity
  • Sixteen DIMM sockets
  • Support up to 256GB DDR3 1600/1333/1066 MHz memory
  • Quad channel memory bus
  • For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
  • See Detailed Memory Support Matrix
Memory Type
  • DDR3 1600/1333/1066 MHz Registered ECC Unbuffered ECC/non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB, 8GB, 16GB
Memory Voltage
  • 1.35V or 1.5V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
On-Board Devices
SATA
  • AMD SP5100 (RAID 0, 1, 10)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM over LAN support
  • Winbond® WPCM450 BMC
Network Controllers
  • Intel® 82576 controller, Dual-Port
      Gigabit Ethernet
  • 10/100/1000BASE-T support
VGA
  • Matrox G200 16MB DDR2
Super I/O
  • Winbond 83527 chip
Input / Output
SATA
  • 6x SATA2.0 (3Gb/s) Ports
LAN
  • 2 RJ45 LAN ports
  • 1x RJ45 Dedicated LAN supports IPMI
USB
  • 7x USB 2.0 ports
  • 2x Rear, 2x header(4 ports), 1x Type A
VGA
  • 1x VGA port
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Ports
  • 1 Fast UART 16550 serial port
  • 1 serial port header
Others
  • 1 UID
Expansion Slots
PCI-Express (Gen 2.0)
  • 1U Left Side: 1/1 UIO/Ex8 or 2 Ex8; or 1 Ex16 or 1/1 UIO/Ex16
  • 2U Left Side: 1/2 UIO/Ex8 or 1/1 UIO/Ex16; or 3 Ex8

  • (See Optional Part List)
Chassis ( Optimized for H8DGU-F )
1U Chassis
  • CSE-113TQ-560UB
  • CSE-113TQ-563UB
  • CSE-113TQ-700UB
  • CSE-113TQ-R650UB
  • CSE-113TQ-R700UB
  • CSE-815TQ-560U
  • CSE-815TQ-563UB
  • CSE-815TQ-720UB
  • CSE-815TQ-R700UB
2U Chassis
  • CSE-213A-R900UB
  • CSE-216A-R900UB
  • CSE-216E16-R1200UB
  • CSE-216E26-R1200UB
  • CSE-825TQ-563UB
  • CSE-825TQ-R720UB
System BIOS
BIOS Type
  • 16Mb Flash EEPROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • DMI 2.3
  • PCI 2.2
  • ACPI 2.0
  • BIOS Rescue Hot Keys
  • USB Keyboard Support
  • Hardware BIOS Virus Protection
  • SMBIOS 2.3
Management
Software
  • IPMI (Intelligent Platform Management Interface) 2.0
  • Super Doctor III
  • Watch Dog
Power Configurations
  • ACPI Power Management
  • Wake-On-LAN (WOL) header
  • Keyboard Wakeup from Soft-Off
  • Power-on mode control for AC power loss recovery
PC Health Monitoring
CPU
  • Monitors CPU Core Voltages, +3.3V, +5V, ±12V, HyperTransport Link voltage, memory voltage, VBAT, Chipset voltage
  • CPU switching voltage regulator
FAN
  • Total up to 8-fan status tachometer monitoring
  • Status monitor for speed control
  • Stauts monitor for on/off control
  • Low noise fan speed control
Temperature
  • Monitoring for CPU and chassis environment
  • CPU Thermal Trip Support
  • Thermal Control for 8x Fan Connectors
  • I2C Temperature Sensing Logic
LED
  • CPU / System Overheat LED
  • Suspend-State Indicator LED
  • +5V Standby Alert LED
  • UID/Remote LED
Other Features
  • Chassis Intrusion Detection
  • Chassis Intrusion Header
Operating Environment / Compliance
RoHS
RoHS 6/6
Environmental Specifications
  • Operating Temperature:
       10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:
       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
       5% to 95% (non-condensing)
OS Compatibility
OS Compatibility Chart
Regulatory
FCC
  • Passed to meet FCC standard requirement
Retail Pack List
Part Number
Qty
Description
H8DGU-F
Retention
I/O Cable 1
Driver Disk
Meganet - Supermicro bg Shadow
Meganet - Supermicro Click to Call